Air Tools (63)

United Rentals has the air tools you need. Air equipment like air drills and air hammers are ideal for construction or demo jobs. Our general air tools are designed to reduce air consumption without reducing power, so you can run multiple tools with one compressor unit. United Rentals' full inventory of air tools includes air backfill tampers, air chipping guns/chipping hammers, air pavement breakers of multiple power levels, air rivet busters, air rock drills of various drilling, and blowing power levels for demolition work. Complete your cutting, finishing and surface preparation with finish air nailers, air staplers, clay diggers, grinders, saws and more.

 

FAQs

What does CFM stand for?

  • CFM stands for cubic feet per minute. CFM is a rating for how much air a tool needs to operate without performance drop. Without an adequate volume of air supply, or CFM of air, the tool will spin, hit, or run with less force or speed.

How much CFM do I need?

  • The CFM need greatly depends on the air compressor and the air tool. On average, you need 1 CFM per square foot (1 CFM/sq. ft.) of floor area.

What's the difference between CFM and SCFM?

  • SCFM stands for standard cubic feet per minute. SCFM is the volumetric flow rate against a standard, whereas there’s no standard for CFM.
     

 

 

Show More

Cat Class: 110-1240

Air Angle Die Grinder

  • 18-20,000 RPM motor
  • Pneumatic powered
  • Lightweight and durable
  • For cleaning and grinding where in-line grinders can't reach
  • Add this die grinder to your cart now
Cat Class: 110-1253

Air Angle Grinder, 4 in., 90 degree

  • For blending, grinding, smoothing and more
  • Side, front or 360-degree directional exhaust
  • Variable speed control
  • Average 10 CFM at 90-120 psi
  • Uses: Ideal for fast weld and stock removal, rust and scale removal, heavy deburring
  • Add this angle grinder to your cart now
Cat Class: 110-1255

Air Angle Grinder, 7 in., 90-degree

  • 7" wheel diameter
  •  Side handle to provide improved ergonomics for specific application
  • Lever throttle control
  • Side, front or 360-degree directional exhaust
  • Uses: Ideal for fast weld and stock removal, rust and scale removal, heavy deburring
  • Add this angle grinder to your cart
Cat Class: 110-0009

Air Angle Grinder, 7 in., 90-degree

  • 7" wheel diameter
  •  Side handle to provide improved ergonomics for specific application
  • Lever throttle control
  • Side, front or 360-degree directional exhaust
  • Uses: Ideal for fast weld and stock removal, rust and scale removal, heavy deburring
  • Add this angle grinder to your cart
Cat Class: 110-1830

Air Backfill Tamper

  • Length 52"
  • Up to 670 bpm
  • Ideal for backfilling holes, packing asphalt and compacting soil
  • Durable steel tamping plate
  • Add this backfill tamper to your cart now
Cat Class: 110-1000

Air Blow Gun Attachment

  • Attaches to compressed air hose
  • Clear work areas easily and cleanly with compressed air
  • Lengths vary
  • Designed for 1/4" inlet hose
  • Uses: Ideal for blowing stubborn debris, dust, water, and more off of all kinds of materials and machinery
  • Add this blow gun to your cart now
Cat Class: 110-1100

Air Chipping Hammer

  • Lightweight and portable length 15 1/4"
  • Between 1,850 and 2,350 bpm
  • Easily adjusted rotating exhaust deflector
  • Use Cases: Ideal for light- to medium-duty demolition of welding, concrete and mortar
  • Add this chipping hammer to your cart now
  • Additional charges apply for points, chisels and miscellaneous tool steel
  • United Rentals will contact you to confirm requirements
Cat Class: 110-1130

Air Clay Digger

  • Ideal for digging clay, shale or frozen ground
  • Between 1,850 and 2,350 bpm
  • Inside or three-finger trigger
  • Compact hand-held equipment
  • Add this clay digger to your cart now
Cat Class: 110-1150

Air Concrete Scabbler, 3 Head

  • Ideal for removing concrete or epoxy, surface preparation and leveling concrete
  • Compact and lightweight hand-held equipment
  • Up to 3,000 bpm
  • Low vibration for reduced strain on operator
  • Add this concrete scabbler to your cart now
Cat Class: 110-1170

Air Concrete Scabbler, 5 Head

  • Ideal for removing concrete or epoxy, surface preparation and leveling concrete
  • Compact and lightweight walk-behind equipment
  • Up to 3,000 bpm
  • Low vibration for reduced strain on operator
  • Add this concrete scabbler to your cart now
Cat Class: 110-1276

Air Drill, 1/2 in. Chuck

  • Pneumatic powered drill, runs on compressed air
  • Keyed or keyless chuck available
  • Variable speed throttle
  • Reversible model available
  • Add this air drill to your cart now
Cat Class: 110-1272

Air Drill, 1/4 in. Chuck

  • Pneumatic powered drill, runs on compressed air
  • 1 horsepower pistol grip with aluminum inner body
  • Church guard for enhanced safety
  • Durable with rugged gearbox
  • Add this air drill to your cart now
Cat Class: 110-1274

Air Drill, 3/8 in. Chuck

  • Pneumatic powered drill, runs on compressed air
  • Ideal for drilling, reaming, honing and more
  • Variable speed throttle from 1,200-2,500 RPM
  • Quick-reverse lever model available
  • Add this air drill to your cart now
Cat Class: 110-0008

Air Grinder, 4-1/2 in.

  • Powerful 1.25 horsepower motor for fast metal removal
  • Portable and lightweight
  • Reduced vibration for more comfortable work
  • Ergonomic grip
  • Add this air grinder to your cart now
Cat Class: 110-1288

Air Hog Ring Guns

  • Fits 3/4" C-type rings
  • Compact and lightweight
  • Fasten insulation and netting and more
  • Ergonomic grip
  • Add this hog ring gun to your cart now
Cat Class: 110-1385

Air Impact Wrench, 1-1/2 in. Drive

  • Maximum torque up to 3,500 ft.-lbs.
  • Comfortable D-handle with inside trigger
  • Airflow up to 95 CFM
  • Torque down or loosen fasteners quickly
  • Add this impact wrench to your cart now
Cat Class: 110-1360

Air Impact Wrench, 1/2 in.

  • Ergonomic pistol grip
  • Ring-type socket retainer
  • 1/2" drive
  • Maximum torque up to 525 ft.-lbs.
  • Add this impact wrench to your cart now